Understanding ccie routing switching lab

News about ccie routing switching lab

How do prefix-lists work?

Wed, 26 Dec 2007 21:13:49 +0000
Prefix-lists are used to match on prefix and prefix-length pairs. Normal prefix-list syntax is as follows:

ip prefix-list LIST permit w.x.y.z/len

Where w.x.y.z is your exact prefix
And where len is your exact prefix-length
“ip prefix-list LIST permit 1.2.3.0/24″ would be an exact match for the prefix 1.2.3.0 with a subnet mask of 255.255.255.0. This does not ...]


IEWB Volume I Update

Sat, 26 Jan 2008 20:09:21 +0000
Ive got some updates to get through. I have been working through some of the Volume I labs in conjunction

We Have A Monkey In The House

Wed, 26 Mar 2008 03:53:39 +0000
So you’re here for some witty writing or bored out of your mind. Really, those are the only two choices I see as possibilities. But you’re here, and most likely a member of Blogcatalog as well. I joined BC last August and I have to say it is the best social networking site that I’ve ...]

IPIPGW Gatekeeper lookup

Sun, 13 Aug 2006 16:26:01 +0000
When using IPIPGW, you need to define a zone prefix to route calls. invia zones does not use the default technology.

Automatic Available vs Automatic Work

Sat, 05 Aug 2006 05:21:03 +0000
Automatic Work setting is at the CSQ level (Or at Agent Based Routing settings level) (Default Disabled).
Automatic Available setting is available for each agent. (Default Enabled)
Default settings make the agent go to Ready status immediately.
Automatic Work Settings override Automatic available setting set at agent level, when Automatic work is enabled.  No matter what the Automatic ...]

MQC-based Frame Relay Traffic Shaping

Thu, 24 Jan 2008 21:00:22 +0000
This is a “modern” way to configure FRTS, using MQC commands only to accomplish the task. With MQC approach, an unified interface has been introduced to configure all QoS settings, irrelevant of underlying technology.
In summary:
- Legacy command frame-relay traffic-shaping is incompatible with MQC-based FRTS (you can’t mix them)
- Fancy queueing could not be used as ...]


Trunking physical switch to CCIE R&S Dynamips lab

Thu, 10 Apr 2008 15:48:13 +0000
 i am trying to add a Catalyst 3560 (SW5, ignore SW6 for now) switch to my Dynamips lab using only one NIC. SW5 will connect to a NIC that will be bridged to ETHSW1 to connecting a physical network to the R&S lab. (The other NIC will be connected to SW6 and bridge that ...]

The BlogCatalog JargonFish Widget

Mon, 07 Apr 2008 15:13:30 +0000
BlogCatalog is always on the look out for new features that can get your blog more traffic as well as enhance the value of your blog to visitors, so that they keep on coming back.
We found a tool that we think you’ll really like. BlogCatalog has partnered with JargonFish, a company that offers ...]

Now that we have come to the end of this composition on ccie routing switching lab, we do hope that you enjoyed reading it as much as we enjoyed writing it.
#



Featured ccie routing switching lab Items



Click Enterprise


642 801
642 811
642 821
642 831
ccie lab exam | ccie lab exam | ccie lab exam